Wotofo Warrior Rda 25mm By JMT Elite Review
Warrior RDA features a clamp style two-post build deck with a domed top cap
The Warrior RDA is a collaboration project with JMT Elite and Wotofo,Featuring two-posts build deck, it allows you to build with both single coil and dual coils easily. A domed top cap which has a great deal of structural strength and functions to compress air as to enhance flavor. 4mm juice well and a 510 drip tip adapter for added versatility,it is purports to be designed by builders for builders.
Specs Of Wotofo Warrior RDA 25mm :
- Made in Collaboration with JMT Elite
- 25mm Diameter
- 4ml Deep Juice Well
- Clamp Style Two Post Build Deck
- Superior Stainless Steel Construction
- Single or Dual Coil Configuration
- Domed Top Cap Design – Flavor Enhancement
- Spacious Build Deck
- Top Secured via Phillips Screws
- PEEK Insulator – Made in Germany
- Dual Multi-Hole Beehive Style Airflow – Fully Adjustable
- 2 Standard 810 Drip Tips and 510 adapter
- Gold-Plated Squonk BF 510 Pin
- 24K Gold Plated 510 Connection
JMT Elite are a group of advanced coil builders that have designed the Warrior BF RDA with Wotofo. With building in mind the Warrior has been designed to accommodate those large bulky builds with minimal fiddling. Flat wire builds, and bulky parallels will fit in this RDA with no problems. Unlike the Recurve RDA the top and barrel are two seperate pieces. The domed top cap compresses the vapour and provides more flavour, while the beehive style airflow on each side providing a large amount of clouds.
The airflow of the Warrior RDA 25mm is very loose, with 24 holes on each side there is a lot of room for adjustment. There is plenty of airflow to cool those big coils, and provide plenty of clouds. The top cap can be adjusted to turn down the airflow, at time it can be stiff. The top cap is made from a thicker SS than the barrel which helps dissipate any heat. Wotofo include two wide bore drip tips and a 510 drip tip adapter. The resin drip tip is slightly shorter, but matches the colour of your RDA. A black knurled drip tip comes pre installed.
The deck is a clamp style which uses Phillips head screws, but it is not spring loaded. A unique design feature of the Warrior RDA is the angled edges of the clamps which allows you to easily slide in the legs of your coil with minimal resistance. Large flat wire builds, and exotic coils will work equally well in this RDA, there is lots of space for building. Wicking is fairly easy, there’s a lot of space for your cotton and your juice. The sides of the barrel also form a juice well, giving the Warrior RDA the juice capacity of an RTA.
Wotofo include two 3mm ni80 Juggernaut coils, and some of their new agleted cotton. The juggernaut coils were extremely easy to slide into the deck and produced some nice flavour and clouds, though they are a little slow to ramp up. The Warrior RDA comes preinstalled with the BF pin, and this RDA is an excellent squonker. With the side airflow you will have some leaking if you happen to over squonk, but with the large amount of space for your cotton you shouldn’t have too many issues. The orings are a good quality, there isn’t too much resistance when you remove the top cap, and with the grooved cap and deck the top cap clicks easily into place.
Pros warrior rda by wotofo :
- There is a lot of space in there for building and your juice
- Standard gold 510 pin and squonk pin included
- 2 Standard 810 Drip Tips and 510 adapter
- Smooth air flow easy build deck
- Top cap sits on a lip
- Great cloud production
- Positive pin extends out far enough for hybrid use
- Accommodating to large builds
- 810 and 510 compatible
- 8 Phillips head screws included
- Many colors for choice
Cons Of Warrior 25mm BF RDA :
- Juice well a bit small
- Top cap get too hot
- AFC too hard for adjust
It’s hard to fault the wotofo warrior rda build it delivers on the promise of being built by builders for builders, it really is a great deck for building. The posts are bigs and easy to insert with leads If you are into your exotic coils. I’ve been using the Warrior on my wotofo recurve 80w squonk mod and a .12ohm build, the Warrior chucks some serious clouds without getting too warm at 147W. If you’re a builder you really are going to love this deck. With so much space in there it is overkill for simple round wire or clapton builds, but you will still get some serious clouds. On a scale of 1-10 in flavour I rate the Warrior RDA a 7.5.This is a cloud RDA but still produce massive flavor.